Standard

Adapted to PV systems, 2 Pfg 1169 / 08.2007 and EN 50618:2015.

​

Thermal parameters

Max. Permissible Ambient Temperature : +90°C (stationary and in motion )
Max. Permissible Operating Temperature of The Conductor :
+120°C, Interpretation according to IEC 60216 : permanent temperature.
120°C for 20,000 h ( = 2.3 years ), at max. 90°C permanent temperature ( = 30 years ).
Short - Circuit Temperature : +200°C (at the conductor max. 5 sec. )
Damp - Heat Test : According to EN 60068 - 2 - 78. 1,000h at 90°C and 85% humidity. Min. Permissible Ambient Temperature : -40°C (stationary and in motion) Resistance to Cold :
Bending test at low temperature according to DIN EN 60811 - 1 - 4, Impact test similar to DIN EN 50305.
Minimum Bending Radius : Fixed Installation approx. 4 x cable Ø

​

Electrical Parameters

Voltage Rating : AC 0.6 / 1.0 kV
Max. PV - System Voltage : DC up to 2.0 kV possible
Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV Test Voltage : AC 6 kV / DC 10 kV (15 min.)

​

Mechanical Parameters

Tensile Load :15 N / mm² in operation. 50 N/mm² during installation
Shrinkage Test : According to EN 60811 - 1 - 3
Shore-Hardness : 85 shore A according to DIN EN 53505
Pressure Test at High Temperature : According to EN 60811 - 3 - 1
Dynamic Penetration Test : According to requirements for cables for PV systems, DKE / VDE 411.2.3

​

Chemical Parameters

Mineral Oil Resistance : 24h, 100°C according to DIN VDE 0473 - 811 - 2 - 1, DIN EN 60811-2-1
Acid and Alkaline Resistance : According to EN 60811-2-1
7 days, 23°C (N-Oxalic Acid, N-Sodium Hydroxide)
Ammonia Resistance : 30 days in saturated ammonia atmosphere (internal testing)
Weather Resistance : Ozone resistance according to DIN EN 50396 test Type B, HD 22.2 test Type B UV - resistance according to UL 1581
(Xenon - Test), ISO 4892 - 2 (Method A) and HD 506/A1-2.4.20
Absorption of water (gravimetric) according to DIN VDE 0473-811-1-3, DIN EN 60811 - 1 - 3.
Behavior in Case of Fire :
Flame propagation.
Single cable according to DIN VDE 0482 Part 332 - 1 - 2, DIN EN 60332 - 1 - 2.
Multiple cable according to DIN VDE 0482 Part 266 - 2 - 5, DIN EN 50305 - 9.
Low smoke emission according to DIN VDE 0482 Part 268 - 2.
DIN EN 50268-2 (light transmittance > 70% ).
Corrosivity according to DIN EN 50267 - 2 - 2.
Toxicity according to DIN EN 50305, ITC - index < 3.

​

Cable Construction

Conductor : Fine Wire Tinned Copper Conductor according to BS EN 60228:2005 cl. 5.
Insulation : UV resistant, cross linkable, halogen free, flame retardant compound for core insulation.
Core Identification : Red, black or natural
Sheath : UV resistant, cross linkable, halogen free, flame retardant compound for Sheath over insulation.
Cable Colour : Black

Please complete the part numbers for these cables by adding the suffix (in place of 'xx') for the insulation colour required as per the list: 02 - black, 03 - red, 13 - natural.